EZ Vacuum Chuck Kit (Fits any MT#2 Lathe) (woodturning) Hold Fast

  • $219.00 $199.00

 (0 reviews)
  
  • Product Code: 45941
  • Reward Points: 199

    Available Options

    - +

    Be the first to ask a question.

    EZ Vacuum Chuck Kit (Fits any MT#2 Lathe) (woodturning) Hold Fast

    A proven solution to vacuum chucking on any lathe which has a MT#2 spindle nose. Very easy to setup. No fussing with home made PVC solutions which leak.

    Vacuum Chucking with Nick Cook

    Vacuum Chucking with Carl Jacobson

     

    Here is everything you need to preform all types of vacuum chucking with your woodturning lathe.

     

    This is the best was to finish turn the bottom foot from a wood plate or platter or bowl on your woodturning lathe.

    Excellent for knocking off the nib of wood after you turn a sphere by hand or using a sphere ball cutting radius jig.

    Works fantastic for quickly sanding then applying a finish to a bowl using vacuum.

    Once you start to explore all that you can do with a vacuum chuck you will wonder how you ever did any work without one.

    Made in the USA

    System Includes the Following:

    1ea - Hold Fast Vacuum Chuck 3in with Aluminum adapter which is molded into chuck for a perfect seal
    1ea - Hold Fast Vacuum Chuck 6in with Aluminum adapter
    1ea - Hold Fast Universal Adapter Rotary Bearing - Top quality aluminum pieces connect a vacuum generator or pump to the vacuum chuck
    1ea - 18in long 
    3/8” plated steel threaded rod - simply trim to size to fit your lathe (additional rod can be purchased to fit other lathes, too!)
    1ea - 10 feet of spare vacuum chuck foam seal 
    2ea - Spare Nose seal
    2ea - Spare Bearing Seal
    2ea - Aluminum Chuck Adapter Seal

    Made in the USA

     

     

     

     

    Here is a close up of the Rotary bearing adapter installed on the lathe spindle wheel:

    Here is a close up of the rotary adapter nose installed in the lathe MT#2 hole:

      

     

    Optional Vacuum Generator (add above in the options section)

    Hold Fast Vacuum Generator (Requires an air compressor) - Now more vacuum and more vacuum volume as you increase air pressure up to 85PSI

    • Vacuum Generator Specs
      • Supply air at 90psi allows you to increase air pressure resulting in increased vacuum and vacuum volume by turning the regulator knob.
      • Typical vacuum at 70PSI= 21"hg
      • Typical vacuum at 85PSI = 25"hg
      • Typical vacuum volume at 85PSI =  .6CFM
      • Compressed air consumption = 1.2 CFM @ 85PSI
      • Note: as the air pressure increases from 70 to 85psi so does the air consumption from your air compressor making it cycle more often.

    Made in the USA

    Optional Reverse Chuck Adapter (add above in the options section)
    High quality tool which is self centering making it simple to mount a work piece onto your vacuum chuck.
    Check out the video above to see this tool in action!
      
     

    A simple process to accomplish a challenging task: 
    a) finish turning your work piece
    b) remove the scroll chuck from the lathe with your work piece attached
    c) attach the scroll chuck to the reversing adapter
    c) Insert the reversing adapter into the lathe tail stock
    d) setup the vacuum chuck on your lathe
    e) slide the tail stock with the attached scroll chuck and work piece up to the vacuum chuck
    f) turn on the vacuum which will attach its self to the work piece
    g) loosen the scroll chuck jaws
    h) slide away the tail stock
    i) finish the work piece 
     

     

    Reviews EZ Vacuum Chuck Kit (Fits any MT#2 Lathe) (woodturning) Hold Fast
    Average rating: 0 reviews
    Total reviews: 0
    Write a review
    Sort By

    Write a review

    Note: HTML is not translated!
       
    Rating
    Please add a product image to enhance your review (max 5):

    Tags: Vacuum, Chuck, Kit, (Fits, any, MT#2, Lathe), (woodturning), Hold, Fast, Woodturning, Chucks

    Related Products