EZ Index Wheel Steel 12in Dia with Lock Post and Spring Loaded Pin
Make perfect spaced holes on your project and strait lines. Solid Steel Wheel produced on a CNC machine
NO FLEX = PERFECTLY STRAIT LINES
Steel ensure you will have no flex when using the index wheel unlike home made wheels made from plastic, resin or wood.
The locking system is very easy to adjust and will fit any size lathe and the locking pin is spring loaded making it easy to pivot the wheel into position.
12in Dia Wheel to fit a 1-1/4in or 33.5mm Lathe Spindle
6 Rows of Holes: 192, 144, 120, 90, 72, 48
Clear Zinc Coating
Made in the USA
To install an index wheel follow these steps:
1 - Remove your chuck
2 - Slide the Index wheel over the threaded spindle and over the machined collar behind it.
3 - Install your chuck over the threaded spindle and tighten it against the index wheel securing it in place.
4 - Your index wheel is now ready to be used. WARNING - Never turn on the power to your lathe with an index wheel attached.
Note - Our 12in diameter wheel has either a milled 1-1/4in center hole or a 34mm center hole. The size of the center hole is specific to it being large enough to slide over the spindle collar of a lathe.
A Powermatic and many other American lathes have a 1-1/4in collar machined into the spindle housing while many European lathes have a 34mm machined collar (Oneway 1640, 2036 and 2436).
If your lathe doesnt have a 1-1/4in or 34mm machined collar then contact us for a guide that can help you enlarge the how for your specific need.
(please select a spindle hole size above)
EZ Index Wheel Steel 12in Dia with Lock and Spring Loaded Pin for Woodturning
- Product Code: indexwheelkit12
- Availability: In Stock